To remove someone’s access to a smart lock, you have to delete every credential they hold, not just their app access. That means their eKey, every passcode they know, their card, their fingerprint or face, and any mechanical key. Do it standing at the door, or with a gateway connected, so the lock gets the change. Then test it.
Most people stop after deleting the eKey. The passcode they’ve used every day for a year keeps working, and nobody notices until the log shows an entry nobody expected.
This post is the removal checklist. It covers a flatmate leaving a shared apartment, a helper whose contract has ended, a tenant handing back a villa, and a relationship that’s over. Don’t start with a factory reset. It wipes you and your family too.
Why isn’t deleting someone in the app enough?
A smart lock keeps a separate list for each way of opening the door, and the app treats each list on its own.
On a TTLock lock like the Altix R9, an eKey lives on the TTLock server and on the person’s phone. Passcodes, cards, fingerprints and faces are stored inside the lock itself. A mechanical key isn’t stored anywhere. It just turns the cylinder.
So deleting a person’s eKey removes one way in. Their code, card, fingerprint and key are untouched. The app won’t warn you, because as far as it knows those are separate entries, not “the same person”.
There’s a second catch. A battery lock isn’t online. It sleeps to save power and only hears about changes when a phone with admin access is at the door over Bluetooth, or a gateway passes the change on. Delete a code from your office in Business Bay with no gateway, and the change either won’t go through or will wait until someone’s at the door. The old code keeps working until then.
Which credentials does the person leaving still hold?
Go through this list for the person leaving. Most people hold three or four of these, not one.
| Credential | Where it’s stored | How to remove it | Needs the lock to get the change? |
|---|---|---|---|
| eKey (app access) | TTLock server and their phone | Delete their eKey in the app | No, but their phone may hold old data until it reconnects |
| Authorised admin rights | TTLock server | Remove admin rights, then delete the eKey | No |
| Passcodes they know | Inside the lock | Delete each code they used or saw | Yes |
| Codes they created themselves | Inside the lock | Check the passcode list for codes you don’t recognise | Yes |
| RFID card or fob | Inside the lock | Delete the card in the app, take the card back if you can | Yes |
| Fingerprint | Inside the lock | Delete each enrolled finger | Yes |
| Face (on face locks) | Inside the lock | Delete the face entry | Yes |
| Mechanical key | Nowhere | Get every copy back, or change the cylinder | Not applicable |
| Gateway or Wi-Fi access | Your router | Change the Wi-Fi password if they could reach the gateway’s setup | No |
| Linked voice assistant | Their Alexa or Google account | Unlink the lock if they set it up on their account | No |
Authorised admin is the one people miss. In TTLock you can make someone an authorised admin, which lets them create their own codes, cards and eKeys. A departing flatmate with admin rights could have made a permanent code for themselves months ago. You won’t know it exists unless you read the passcode list line by line.
How to remove someone’s access, step by step
Do these in order. The first two stop the remote access. The rest close the door.
- Remove their admin rights, if they had any. Open the lock in TTLock, go to the eKey list, find their name and turn off admin. This stops them creating new credentials while you work.
- Delete their eKey. Same list. If you’ve lost track of who has which eKey, use Reset eKey in the lock settings. It cancels every eKey on that lock at once, and you resend eKeys to the people who should keep access.
- Stand at the door, or make sure the gateway is online. Everything from here needs to reach the lock.
- Delete their passcodes. Read the whole list, not just the one with their name. Delete any code they used, any code they could have seen, and any code you don’t recognise.
- Delete their card and their fingerprints. If you didn’t name entries when you enrolled them, delete anything you can’t account for and re-enrol your own.
- Deal with the mechanical key. If you can’t get every copy back, plan a cylinder change.
- Check anything outside the lock. Building access cards, a parking remote, the gateway’s Wi-Fi, a shared Alexa account, a video doorbell app shared with them.
- Test at the door. Try their old code. It should fail. Then read the log for the past few weeks.
If the codes are a mess and you can’t tell whose is whose, TTLock has a Reset Passcode option in the lock settings. It cancels the passcodes created for that lock in one go, but not the admin passcode. Check the list afterwards and delete any code still showing. You’ll then need to send new codes to everyone who should keep access, so tell your family before you do it.
What about the mechanical key?
This is the only credential you can’t delete from your phone.
A copied key works until the cylinder changes. Our CL1X smart cylinder ships with two metal keys, and like most cylinder keys, they can be copied by any locksmith. If someone had a key for a year, you can’t know how many copies exist.
Ask yourself two things. Did you get back every key you handed out, and do you trust that no copies were made? If the answer to both is yes, you’re done. If either is no, change the cylinder.
On many mortise smart locks the key goes into a separate cylinder that can be swapped without replacing the lock. Some models use a cylinder built into the lock body. Message us your model before buying anything, and we’ll tell you which one you have.
Should you factory reset the lock instead?
Not as the first move. A factory reset wipes every fingerprint, card, code and eKey, including yours and your family’s. You then set the lock up again from scratch, re-enrol every finger and re-send every code.
It also doesn’t touch the mechanical key, building access cards or anything outside the lock. So a reset alone still leaves gaps.
Reset only makes sense in two cases. You’ve lost admin access and can’t get it back, or the credential list is so messy you’d rather start clean than read it. Our post on factory resetting a Lockin lock covers what a reset destroys on that brand.
What to check for a flatmate, helper, tenant or ex-partner
The steps don’t change, but each case has its own blind spot.
| Who’s leaving | What they usually hold | What people forget |
|---|---|---|
| Flatmate in a shared apartment | eKey, own code, fingerprint, maybe admin | Admin rights, and codes they created for their own guests |
| Helper or nanny at contract end | Time-limited code, fingerprint, card | A permanent backup code made “just in case” |
| Driver | Card or code for the villa side door | The garage remote and the gate code |
| Tenant handing back a villa | Everything, plus their own admin account | Making sure admin transfers to you before they leave |
| Ex-partner | Often full admin and a key | Shared Wi-Fi, Alexa, doorbell app and key copies |
| Contractor who finished early | A code with an end date | The code still works until its end date. Delete it now |
For staff, the set-up side matters as much as removal. Our guide to domestic worker access in Dubai shows how to give codes that expire on their own.
For tenants, get the admin handed over before the keys go back. If the tenant set up the lock under their own TTLock account and you don’t have admin, you can’t remove anyone. They need to transfer the lock to your account, or you’re looking at a reset. In shared housing, who’s allowed to change or reset a lock isn’t always the person standing at the door. Our post on who can change the lock in Dubai shared housing covers that.
If the person leaving isn’t someone you’re on good terms with, or you feel unsafe, do all of this the same day, change the cylinder, and talk to building security about their access cards. If you’re in danger, call Dubai Police on 999.
Worked example: a flatmate leaves a JLT apartment
This is a composite of the cases we get asked about.
Three people share a two-bedroom in JLT. The lease holder, Ravi, is the TTLock admin on an Altix R9 at the main door. Sam has an eKey, his own code and a fingerprint. Sam was also made an authorised admin last year so he could let in the AC technician. Sam moves out on Saturday. There’s a G2 gateway in the hall.
- Saturday, 10:00. Sam hands back his RFID card and his metal key. Ravi asks if he ever copied the key. Sam says no.
- 10:05. Ravi turns off Sam’s admin rights in the eKey list.
- 10:06. He deletes Sam’s eKey.
- 10:10. He opens the passcode list. There are nine codes. Three belong to the current residents, one to the cleaner. Sam’s code is there. So are four codes Ravi doesn’t recognise, all created by Sam’s account.
- 10:14. He deletes Sam’s code and all four unknown ones. The gateway pushes the changes to the lock.
- 10:17. He deletes Sam’s card and both of Sam’s fingerprints.
- 10:20. At the door, he types Sam’s old code. Rejected. He tries one of the unknown ones he’d written down. Rejected.
- 10:25. He reads the log for the past month. Two unlocks with an unknown code on weekday afternoons. Sam explains he gave a code to a friend who fed his cat. Ravi had already deleted it.
- 10:30. He changes the Wi-Fi password, since Sam had access to the router the gateway uses.
About 30 minutes. Without the gateway, steps 5 and 6 would still work because Ravi was home. If he’d been travelling, Sam’s code would have stayed live until Ravi got back to the door.
That leaves the key. Sam says he never copied it, and Ravi believes him. If Ravi weren’t sure, the next step would be a new cylinder.
How do you stop this being a mess next time?
Set it up right on day one and removal takes ten minutes.
- Name every entry after the person. “Sam phone”, “Sam right index”, “Sam card”. Not “Card 2”.
- Give each person one code, theirs alone. Never share a single code between three people.
- Put end dates on anything temporary: helpers on probation, contractors, guests.
- Keep admin with as few people as possible. Make the second admin a family member, not a flatmate.
- Use cards for staff. A card can be handed back and deleted, and nobody can watch you type it.
- Add a gateway if you’ll ever remove someone while you’re away.
- Check the passcode list once a month. Delete anything you can’t explain.
What does it cost?
Removing access is free. It’s done in the app. You only spend money if something’s missing. Prices are our listed prices on the day of writing.
| Item | When you need it | Price |
|---|---|---|
| Removing eKeys, codes, cards, fingerprints | Every time someone leaves | Free |
| Altix G2 gateway | You want to remove access when you’re not at the door | AED 179.99 |
| Altix RFID cards, pack of 5 | Replacing cards that weren’t returned, or moving staff to cards | AED 34.99 |
| Altix CL1X smart cylinder | Swapping a key cylinder for one with app, card and fingerprint | AED 504.99 |
| Altix R9 smart lock | Replacing an old lock that can’t remove credentials one by one | AED 494.99 |
When don’t you need to buy anything?
- If they handed back every key and card, and you’re at the door when you delete their codes, you need nothing new.
- If they only ever had an eKey with an end date, it’s already expired. Check the list to confirm and move on.
- If you’re home most days, skip the gateway. Do the deletions at the door.
- If the lock is on a store room or a bedroom and the person was a trusted family member, the risk is low. Delete their entries and leave it there.
- If you can’t get a key back but you trust the person and nobody else had it, a new cylinder is your call, not a must.
Buy what makes removing access easier
Popular Post
View All
Are Smart Locks Secure? Myths vs. Reality (Expert Breakdown)
Are smart locks secure for real homes and properties in Dubai and Abu Dhabi?For most households, rentals, and…
Read More Info โ
How to control Smart Locks with Alexa, Google Home
Smart locks arenโt just about replacing keys, theyโre about convenience. One of the biggest advantages of choosing the…
Read More Info โ
Tuya vs TTLock โ Which App is best?
Tuya vs. TTLock: Which Smart Lock Platform Should You Choose for Your Home? Smart locks are becoming more…
Read More Info โ
Smart Locks in UAE: The 2026 Buyerโs Guide You Actually Need
If youโre upgrading security in your home, villa, or office in the UAE, the smartest move in 2026…
Read More Info โ
Bluetooth vs Wi-Fi Locks – Which One Fits Your Space?
Should your smart lock work only when you are standing at the door, or should it let you…
Read More Info โ
Best Smart Locks in Dubai & UAE (2026): Top Models by Door Type
This article replaces the content of the existing post at the URL below and absorbs the duplicate post.…
Read More Info โGet new smart lock guides by email
Buying guides, installation tips and offers for UAE homes and businesses.
Unsubscribe anytime.



















